This skid steer attachment is absolutely vital in the tree industry and is quickly becoming a necessity among all contractors today. We offer this unique skid steer attachment in a assortment of sizes for a variety of applications: the Standard Root Grapple and the Monster Root Grapple.
Perform 3 jobs in one In a single pass the root grapple rakes away debris, keeps it in a manageable pile to move around with ease, and the round bottom bar provides the necessary tool for backfill. Load or pile logs, brush, rocks, demolition debris, and many other materials. Ideal for separating dirt from rock, lumber, or building materials with ease. The larger capacity means less loading and will save both time and energy. Lower your labor costs and shorten project schedules. Hydraulic cylinders operate independently to adjust for uneven loads. Enclosed cylinders and hoses come standard to minimize maintenance. Tines curve upward in order to slide across the land without damaging topsoil or catching utility lines or cables.


This skid steer attachment is for people who make a living with skid steers or tractors. Its industrial strength and produced for every day use. Constructed of ½ top quality steel plate. (60,000 psi) Oversized points and bushings increase the durability. The lifting capacity of this skid steer attachment exceeds that of the machine every time. Hydraulic cylinders are 2 bore and 10 stroke. Opened, distance from tine to tine is 38 inches. Depth from inside front to back of the Root Grapple is 34.5 inches.
Available in 5 sizes: 60, 66, 72, 78 and 84.
Hydraulic
Cylinders
Bore - 2"
Stroke - 10"
Pins - 1.25"
|
Bucket
Tines
Spacings -
8.5"-9"
Thickness - .5"-4"
Material - .5"
60,000 psi min.
|
Grapple
Tines
Opening
width - 38.537"
Material - .5"
60,000 psi min. |


We boast the largest loading capacity of any root grapple on the market with this enormous skid steer attachment. You would think that it was produced for backhoes or trackhoes, but its design came about due to the increasing horsepower of skid steer loaders. This one is recommended for 75 horsepower skid steers or above. Its constructed of ½ top quality steel plate. (60,000 psi) Opened, the distance from tine to tine measures a whopping 52. Depth from inside front to back is 47. The framing of this monster root grapple consists of 4 x 4 tubing and 3 pipe. Dont let that extra HP go to waste and get the most out of the skid steers lifting capacity.
Available in 4 sizes: 72, 78, 84. and 96.
Hydraulic Cylinders
Bore
- 2"
Stroke - 10"
Pins - 1.25"
|
Bucket Tines
Spacings
- 8.5"-9"
Thickness - .5"-4"
Material - .5"
60,000 psi min.
|
Grapple Tines
Opening
width - 51.298"
Material - .5"
60,000 psi min.
|



The Medium Duty Root Grapple
is designed for smaller tractors and skid steers.
Top quality 3/8" steel plate make up the bucket
and grapple tines to reduce the weight and still
offer the superior quality grapple Loflin
Fabrication is known for. The same 2" bore
10" stroke cylinders and 1.25" pins as our
standard grapple and 1" pivot pins and
greaseable pivot points makes this attachment all
you need for moving and loading brush.


Our skid steer forks are a great skid steer attachment to have on hand whether it is on the farm or on the job site. Use skid steer forks to load bales of hay or pallets of grain, then take the forks to the construction site and lift piles of lumber and other building materials. Whatever the use, these skid steer forks are built to withstand maximum weight and pressure.
Our skid steer forks are constructed of 1 3/8 thick and 4 wide solid forged alloy steel. Fork tines taper for easier loading and unloading. To provide versatile use of the skid steer forks, we furnish 3 adjustable lock-in positions that increase or decrease width between fork tines. All lock-in points are located on a sturdy fork carriage bar. Once the e-z locks are engaged, the carriage bar delivers optimal support and stability.The skid steer fork frame consists of a fork guard, a carriage bar, and 4x 4 square tubing. The fork guard is constructed of Ό plate steel with an updated design that allows for ultimate visibility. The carriage bar is specifically designed to hold forks and is constructed from one piece of precision machined billet steel. Finally, the square tubing along the bottom of the frame increases the strength and rigidity of the fork frame, making our fork assembly the toughest on the market.Forks
Available: 36, 42, 48, 60, 72Block Forks: 48


This fork frame with single cylinder grapple has multiple settings to quickly adjust opening and closing both force and ability. Rugged frame built with 4 by 4 square tubing top and bottom. Great for moving stacks of plywood, building materials, pipe, etc. Grapple pulls material towards skid steer and the hooked arms hold material firmly in place. This grapple is capable of carrying loads up to 7000 lbs and can open to 56!



The Loflin Fabrication
walkthrough fork frame is a heavy duty 5000lb
capacity pallet fork frame designed for todays newer
more powerful skid steers with enclosed cabs. These
high visibility frames allow for easy access to and
from the machine through the door.


The grapple bucket attachment combines the loading and leveling actions of a skid steer bucket with the grabbing ability of two hydraulic grapples. The grapple bucket attachments basic design allows it to load and grapple large and/or uneven objects as well as clean up the smallest debris. Our grapple buckets feature enclosed cylinders and hoses to protect against debris and stray limbs. We have also increased the depth of the bucket - giving it a larger loading capacity than ever before. Reinforced ribbed bottom reduces bowing and wear of the grapple bucket. With our design you will have an unobstructed view of the materials entering and exiting the skid steer
attachment.
Available in 5 sizes: 60, 66, 72, 78, 84
Hydraulic Cylinders
Bore
- 2
Stroke - 10
Pins - 1.25
|
Bucket
Tines
Spacings - 8.5-9
Thickness - .5-4
Material - .5
60,000 psi min.
|
Grapple Tines
Opening
width -37.248
Material - .5
60,000 psi min.
|

 
The Front Dump Bucket has a similar
capacity
to our Snow and Litter Bucket.
With the Front Dump Bucket, you will have the ability to load materials like never before. This attachment will change the way you load dump trucks, spreaders, and tandem dumps. You will gain up to 5 feet additional height and 3 feet of reach with the average skid steer. You will be able to load more material in much less time.
Available in 4 sizes: 72, 78, 84, 96


The Loflin Fabrication snow pusher
is built tough for everyday use. This attachment
comes ready to use with 3/16" formed back,
3/8" gussested sides and 1/2" wear shoes
on the bottom, Available with 1 1/2"x10"
rubber scrape blade or 5/8"x6" steel
scrape blade. Comes in sizes ranging from 7 foot to
14 foot, we can build a pusher to cover your needs.


We manufacture a variety of skid steer loader buckets that can be used in multiple applications. Our skid steer loader buckets offer unique design features and each bucket is built with strong, durable construction. This construction includes industrial strength 3/16 plate steel and feature Ύ x 6 cutting edges. Cutting edges are not wrapped around, but welded together to ensure longer wear. This design provides added durability. All of our skid steer loader buckets come standard with Safety Treads. These provide the operator greater traction and support while


All Buckets also available
with Large Teeth, Tooth Bar
or Bolt-on Edge

Other names for
this skid steer loader bucket may include utility
bucket or dirt bucket. This rugged skid steer loader
bucket offers excellent visibility of the cutting
edge and the compact form produces powerful break
out force. Add a tooth bar and use it for tough
digging. It is ideal for construction and
excavating, as well as material handling.
60 - .404 yd3
78 - .526 yd3
|
66 - .445 yd3
84 - .567 yd3
|
72
- .485 yd3 |


This is the skid steer loader bucket with the greatest visibility of the cutting edge. Especially ideal for use with skid steer loaders where the customer is sitting lower, such as the John Deere and New Holland skid steer loaders. It measures 38 from front to back along the bottom. It serves as an excellent tool for grading and leveling or spreading fertilizer and other landscaping materials, such as crushed rock.

60 - .578 yd3
78 - .753 yd3
|
66 - .636 yd3
84 - .811 yd3
|
72
- .694 yd3 |


You can use the Snow and Litter Bucket for a variety of light materials, such as grain, seed and mulch. This skid steer attachment is designed to be large and lightweight so the customer can get the maximum use of the lifting capacity of the skid steer machine. The sides are built up to minimize spillage and are designed to keep the material in the bucket. The high back makes this bucket ideal for pushing snow.

60 - .821 yd3
78 - 1.06 yd3
|
66 - .904 yd3
84 - 1.15 yd3
|
72 - .986 yd3
96 - 1.31 yd3
|


This bucket is designed and built for the most extreme duty and is ready to handle your 75 plus horsepower skid steer! 3x3 tubing across the top plate with gussets support the double plated quick attach. Ό sides, ½ sides, and a 1x8 cutting edge all serve to make this one tough bucket!
60 - .404 yd3
78 - .526 yd3
|
66 - .445 yd3
84 - .567 yd3
|
72
- .485 yd3 |





This bucket has the largest capacity of all the Loflin Fabrication buckets. These buckets work great for handling large volumes of light materials or caking out poultry houses.
60 - 1.46 yd3
78 - 1.90 yd3
|
66 - 1.6 yd3
84 - 2.04 yd3
|
72 - 1.75 yd3
96 - 2.34 yd3
|


This versatile skid steer bucket allows the user to perform a wide variety of tasks. With one bucket, the operator can dump, load, dig, level, grapple, doze, etc. This bucket has heavy duty construction and a reinforced Ό extra strength steel floor with a Ύ x 6 front cutting edge and a ½ x 4 rear cutting edge. The dozing/cutting edge is a 5/8x 6 bolt on edge. Well protected heavy duty hydraulic cylinders create powerful clamping action.
Available in 5 sizes: 60, 66, 72, 78, 84
Hydraulic Cylinders
Bore - 2.5
Stroke - 8
Pins - 1.25
|
4N1 Specs(front)
Hinge Pins - 1.5
Front Cutting Edge-.75x6
Opening- 38.7
Reinforced Floor - .25
Back Cutting Edge - .5x4
|
4N1 Specs (back)
Back Cutting Edge -.625x6
|


The LF Stump Bucket is a powerful tool for the fast and effective removal of stumps and roots. Constructed of ½, laser cut steel with serrated edges. Cast steel teeth pinned to shanks welded to a 1 x 8 cutting edge. The LF Stump Bucket is 62.5 long and 12 wide on the business end, making it a great tool for tasks like moving trees and digging ditches. The 20 deep trough works well to carry rocks, trees, and other materials around the jobsite. Nothing stays in the way of this bucket!



The LF Stump Grapple Bucket is our
stump bucket
with the addition of a single cylinder grapple.
Dig out the stump, pop it out of the ground,
and haul it away. Handle brush, logs, debris
and other materials securely with this sturdy
grapple.


The LF Rock Bucket is great for sifting and sorting materials, clearing rocks from fields, and removing debris. This great jobsite bucket comes in a standard 72 width, with custom sizes available. Constructed with 3/8 steel with 3 spacing. Custom widths and tine spacing is available upon request.



Bottom 2
Spears are Removable
A well built hay spear is essential on the farm. Our hay spear attachment has 3 spears for optimum stability. The bottom two spears, supporting the round bales, are made from 1018 cold rolled steel. The center bale spear is one piece of solid forged steel. The frame is constructed of 3 x 3 square tube, making the LF Hay Spear a very rugged piece if equipment.



The Tree Boom is the perfect piece
to complete
your equipment inventory. Use
it to set trees and move cut trees. This
attachment will also double as
a boom pole. Great for moving and
loading construction materials or
other attachments. The frame is constructed
of 4 x 4 x 1/4 tubing giving
this attachment boasts a 3,500
lb. lifting capacity.



Our Heavy Duty Tree Boom is
the perfect piece to complete your equipment
inventory. Use it to set trees and move cut trees.
This attachment will also double as a boom pole.
Great for moving and loading construction materials
or other attachments. The frame is constructed of
4" x4" x 1/4" tubing, gusseted
topcatch and boom pole give this attachment a
4,500lb lifting capacity.


LF Augers are designed for heavy-duty use in commercial and industrial applications. Our units are constructed of ½ laser cut steel. Hydraulic drive motor and Auburn planetary gears power through the hardest ground. No chains or gearboxes. These drive units have 2 hex output shafts. Bits are available from 4 to 48. Bits sold separately.



LF Brush Cutter is constructed of Ό laser cut steel and is structurally
reinforced to handle the toughest undergrowth and brush. The dualedge
cutting blades are powered by a direct drive hydraulic motor
with a pressure relief valve for smooth shutdown. No gearbox to
go bad, no shear pins or drive clutches to replace. Our brush cutter
is engineered for demanding conditions and rugged dependability.
Move over rough ground and cut through heavy brush with ease.




Built with the
same quality and materials as our standard brush
cutter. The open front design with push bar allows
for faster removal of larger brush and shrubs.
Available in 5 foot and 6 foot with low or high flow
motor.


The LF Wood Splitter is a great tool to reduce labor and increase efficiency. This unit features a 35 ton hydraulic cylinder and can split logs up to 32. Built with the universal skid steer attachment for mounting upright or inverted no bolts required just turn unit over and hook up. Operate this attachment from the comfort of your cab. Position wood to split on the ground or over a trailer. Your choice of a 2-way or 4-way splitting head.

 
The LF Universal Adapter converts your pin on tractor loader to a Universal Skid Steer quick attach. Improve your tractor loaders versatility and productivity by being able to accept many different skid steer attachments. * We can also convert your existing attachments to Universal Skid Steer quick attach.



The Loflin
Fabrication Bale Squeezer is the perfect tool for
round bales. Formed from .150 wall 2.375 round tubing
makes for a strong smooth surface to prevent damage to
weatherproof wrapping. Our Bale Squeezer makes moving,
loading, and stacking 5 foot bales quick and easy.


The Loflin
Fabrication tree puller is all you need for clearing
shrubs, saplings, and small trees from your land.
Built tough with 1/4" wall tubing and 1/2"
thick plate and fully enclosed cylinder this puller is
built to last.


The solid boom LF Back Hoe attachment is a rigid tool for digging ditches, trenches, footing or removing stumps. Use the maneuverability of the skid steer to your advantage, no stabilizers required. The standard bucket is 12 wide, with bucket widths available from 8 to 24.
|